Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Chatsworth, CA
Gate access control in Chatsworth usually means one of two things: a keypad or intercom system on an older ranch-style estate, or a heavy pipe-frame gate on a horse property that has outlived its 1990s operator. We repair, replace, and upgrade both, and we write the price down before we touch anything. Call (805) 516-0855 if your gate will not open or your keypad quit this week.
Why Chatsworth Homes Are Different
Chatsworth is not a typical San Fernando Valley gate market. Much of the western half of the neighborhood sits under equestrian zoning, which means long private approaches, wide driveway gates built from heavy ornamental iron, and operators that get asked to swing a lot more weight than the 10-foot residential gates common elsewhere in LA. The wind makes it worse. Santa Ana events funnel through the Santa Susana Pass and hit Chatsworth with sustained gusts that regularly top 60 mph, and that is the leading cause of operator burnout, bent swing arms, and panels blown off their tracks in this area.
The housing stock adds a second layer. Many Chatsworth homes date from the 1950s through 1970s, and a meaningful number still run original Linear or Elite swing-gate operators from the 1980s and early 1990s. Those units are past service life, and parts are getting scarce. When summer heat pushes past 105°F, nylon drive gears that survived twenty mild summers tend to strip in one afternoon. None of this is a reason to replace a gate that can be repaired, but it does mean we quote honestly when an older operator has reached the end of its useful life.
Our Main Chatsworth Services
These are the two services Chatsworth homeowners call about most often. Each links to its own detailed page with pricing, sub-jobs, and local specifics.
Gate Repair in Chatsworth
Wind damage, seized hinge pins, and operators that stop mid-travel are the calls we get from Chatsworth every week. The repair scope is determined by the gate’s weight and the condition of the operator, and we write the flat price before any work begins. If your gate is off its track or the arm is bent, we handle that on site. Gate Repair in Chatsworth covers the full breakdown.
Gate Installation in Chatsworth
New construction in Chatsworth, particularly on half-acre-plus lots with equestrian rights, often needs a gate that will hold up to both horses and wind. We measure for grade, set the posts at the right depth for sandy foothill soil, and size the operator to the actual panel weight, not to a catalog number. Gate Installation in Chatsworth walks through the process and the price structure.
Gate Motor & Opener in Chatsworth
When a Chatsworth operator has been through several Santa Ana seasons, the failure is usually in the motor, the limit switches, or the control board. We service nine major automation brands, so we do not steer you toward a replacement if the motor on the property can be rebuilt or tuned. Gate Motor & Opener in Chatsworth has brand-specific detail.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Chatsworth
Most Chatsworth access-control work sits at the intersection of old hardware and new expectations. Homeowners want phone entry or a keypad that works, but the wiring on a 1960s ranch gate was never designed for it. We replace and upgrade systems on properties throughout Chatsworth, including the hillside-adjacent tracts where fire-access concerns make a working manual release a life-safety issue. See our full Gate Access Control hub for the broader service picture.
Keypad Entry
Signs you need it
Your keypad works in the morning and not in the afternoon, which is classic heat-related solder failure on older boards.
What it costs in Chatsworth
A new keypad entry system in Chatsworth typically runs $280-$650 depending on whether we reuse your existing wiring or pull new low-voltage line through conduit.
How we do it
We test the existing wiring with a multimeter, replace the keypad and, if needed, the control board, then photograph the new codes and hand you a written record.
Phone Entry
Signs you need it
Visitors at the gate call you, but your phone never rings because the cellular unit lost its signal or the relay is stuck.
What it costs in Chatsworth
Phone entry systems in Chatsworth range from $450-$1,100 installed, with the spread driven by whether you need a cellular adapter or can run to existing copper.
How we do it
We install the dialer or cell unit, program the forwarding number on site, and test the relay with a live call before we leave.
What Gate Access Control Costs in Chatsworth
| Item | Typical range in Chatsworth |
|---|---|
| Keypad entry system | $280-$650 |
| Phone entry system | $450-$1,100 |
| Video intercom | $900-$2,200 |
Can you add a keypad to my existing gate operator in Chatsworth?
Yes, in most cases. We match the keypad to your operator’s control board and reuse the existing conduit when it is in good condition. The price is written before any work begins.
Does my Chatsworth gate need a manual release that works?
Yes. Chatsworth sits inside a Very High Fire Hazard Severity Zone, and a seized manual release is a life-safety problem. We test and free or replace the release on every access-control service call. Call (805) 516-0855 if yours has not been tested in years.
Gate Parts & Welding in Chatsworth
Chatsworth’s heavy ornamental gates and ranch-style pipe frames need parts and welding that match the original material. A thin replacement hinge on a 400-pound gate fails the first time the Santa Ana wind loads it. We stock or fabricate proper-weight components and weld on site. See our full Gate Parts & Welding hub for the full component list.
Hinge Replacement
Signs you need it
The gate sags a half-inch and drags on the ground, or the hinge pins have ground down enough that the gate clanks when the wind shifts.
What it costs in Chatsworth
Hinge replacement in Chatsworth typically runs $180-$450 per hinge, with the labor higher on granite or stone posts that need careful drilling.
How we do it
We lift the gate with a jack, cut off the old hinge, weld or bolt on the replacement, and re-check the swing arc before we call it done.
Gate Rollers
Signs you need it
The slide gate does not roll smoothly anymore, and you can see flat spots on the wheels where the bearings gave out.
What it costs in Chatsworth
Gate roller replacement in Chatsworth ranges from $150-$350 per roller, with the price dependent on whether the track is still true.
How we do it
We remove the old roller assembly, inspect the track for wind-driven deformation, replace the rollers, and re-level the gate.
What Gate Parts & Welding Costs in Chatsworth
| Item | Typical range in Chatsworth |
|---|---|
| Hinge replacement | $180-$450 per hinge |
| Gate rollers | $150-$350 per roller |
| Custom welding | $120-$280 per hour |
Can you weld my iron gate in place, or does it have to come off?
We weld in place whenever possible. Removing an ornamental gate risks cracking the original iron, and in-place welding avoids that. The price is written before we set up.
How much does a snapped gate post cost to replace in Chatsworth?
Most post replacements in Chatsworth land between $400 and $900 depending on whether we can reuse the original footing or need to pour new concrete. Call (805) 516-0855 for a written number.
Brands We Service in Chatsworth
We work on Ghost Controls, DoorKing, Elite, and Mighty Mule operators in Chatsworth, and stock common parts for all of them. Turnaround on a stocked component is same-visit. See our brands for the full list.
Pricing for Gate Repair in Chatsworth, CA
| Service | Typical range in Chatsworth |
|---|---|
| Keypad entry system | $280-$650 |
| Phone entry system | $450-$1,100 |
| Video intercom | $900-$2,200 |
| Hinge replacement | $180-$450 per hinge |
| Gate rollers | $150-$350 per roller |
| Custom welding | $120-$280 per hour |
Two things push prices up in Chatsworth: wind loading on heavy ornamental gates that makes operators work harder, and older 1980s and 1990s control boards that need matched replacement parts rather than universal kits. The price we write down before any work starts is the price you pay.
Neighborhoods We Serve in Chatsworth
We cover all of Chatsworth, from the flat ranch tracts near Devonshire to the hillside-adjacent streets up against the Santa Susana foothills. Most calls are reached same-day, and emergency wind-damage repairs are dispatched as soon as a technician is free.
- Rancho Susana
- Lake Manor
- Twin Lakes
- Indian Springs
- Stony Point
Service Area - Cities Near Chatsworth
We also serve the neighboring communities around Winnetka, CA, Canoga Park, CA, West Hills, CA, and Calabasas, CA with the same written-price, documented-work standard.
Serving Chatsworth, CA - Our Local Coverage Area
We’re based in the Chatsworth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Chatsworth
Our Los Angeles office dispatches directly into Chatsworth, and we reach most calls the same day. A live person answers the phone 24 hours a day, so you will not sit in a voicemail queue while your gate is stuck open.
Some Chatsworth homeowners associations require written approval before a visible change to the driveway gate, but a like-for-like repair or operator swap usually does not trigger it. We can note the scope in writing if your HOA needs it.
In many cases yes, but not always. We check the control board and match the accessory to the existing wiring. If the board will not accept the new part, we quote the upgrade in writing before proceeding.
When your gate stops working in Chatsworth, you want a written price and a technician who will leave a photo record of exactly what was found and what was replaced. That is how we work on every call. Call (805) 516-0855 for a free estimate, even at 2 a.m.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Chatsworth Customers Say
"Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E."Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N.