Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Ghost Controls Keypad & Intercom Repair: The Camarillo Owner’s Guide
Ghost Controls keypad and intercom repair in Camarillo typically runs $145-$285 installed, depending on whether we’re replacing the keypad face, the intercom board, or a failed transformer, and most swaps are completed same-day because we keep Ghost Controls-compatible parts on the truck. The typical discovery is unglamorous: you punch in your code, nothing beeps, the gate sits there, and now you’re either walking to the house through the pedestrian gate or sending a family member to test the wall button. Sometimes moisture from Camarillo’s marine layer gets into the housing and corrodes the contact pads. Other times the intercom speaker simply goes quiet after three or four years of heat cycling. We diagnose the actual failure before quoting anything, because replacing a $40 harness when the $12 keypad ribbon is the culprit is exactly the kind of guesswork The Haven Standard exists to prevent.
Which Ghost Controls Models This Applies To
Ghost Controls builds keypad and intercom modules for its AXDP, TSS1, and TDS2 opener lines, plus the standalone AXDP1 wireless keypad and the AXIM intercom kit that pairs with the same receiver board. The compatibility gotcha most Camarillo owners hit: the pre-2019 keypads used a 4-wire ribbon connection, while the 2019-and-later models switched to a 6-wire harness with a separate ground return, so a new keypad won’t talk to an old board without a pin adapter. We check the date code sticker inside the battery compartment before ordering anything, because that single digit decides the entire wiring path. For OEM versus aftermarket, our honest position: Ghost Controls OEM keypads are fine, but the aftermarket units from the same Shenzhen factories often ship with better weather gasketing and cost 30-40% less, which in Camarillo’s coastal humidity matters more than brand loyalty. We’ll install whichever you want after showing you both prices in writing.
We’re an independent service provider, by the way, not affiliated with Ghost Controls. That’s an advantage on diagnosis: we stock Ghost Controls-compatible keypads, intercom boards, and harnesses, but we also carry LiftMaster, Mighty Mule, and DoorKing parts on the same trucks, so we’re not married to one ecosystem.
Signs Your Ghost Controls Keypad & Intercom Repair Is Failing

- Keypad lights up but gate doesn’t move. Usually a dead relay on the receiver board, not the keypad itself. We bench-test the board before recommending a keypad replacement, which saves you about $120 on average.
- Intermittent code acceptance. Moisture is corroding the membrane contacts under the number pad. Camarillo’s fog cycles accelerate this; we see it most on north-facing keypads that never get direct afternoon sun.
- Intercom audio is garbled or one-way. The speaker cone deteriorates from UV exposure, or the 24VAC transformer feeding the intercom board has dropped below 18 volts under load. We meter the transformer first, because replacing the intercom module when the transformer is failing just kills the new part in six months.
- Keypad works but intercom doesn’t, or vice versa. The shared data line between modules has oxidized at the splice. Ghost Controls runs both devices on one 2-wire bus; when the splice at the gate post gets wet, one device drops off first.
- Constant beeping or phantom button presses. A stuck key on the membrane, usually from insect intrusion or hardened salt spray. We’ve opened keypads in Camarillo’s coastal zones with enough dried salt inside to season a steak.
Before
AfterReplacement Cost & What’s Included
Here’s the Camarillo pricing reality, written down like we’d hand it to you before the job starts:
- Keypad replacement (parts + labor): $145-$195, depending on OEM or aftermarket and whether we’re reusing the existing harness.
- Intercom module replacement: $175-$245, including board, speaker, and weather gasketing.
- Transformer replacement: $95-$135, including the new 24VAC transformer and voltage verification under load.
- Full keypad + intercom swap: $260-$320 when both have failed, which happens more often than vendors like to admit because they share that same 2-wire bus.
Every quote includes the written price before we touch a screwdriver, the photo log of what we found and what we installed, and the 365-Day Done Right Promise covering the part and our workmanship. No surprise invoice. No “call for a quote” runaround. You get the number in writing, you approve it, we do the job.
DIY or Call Us?

You can safely check a few things: whether the keypad’s backlight is actually on, whether the gate’s wall button still works (if it does, the opener is fine and the keypad or intercom is the issue), and whether the breaker feeding the gate has tripped. That’s real diagnostic information, and it helps us quote faster when you call. What we’d caution against: opening the keypad housing and testing live terminals. Ghost Controls runs low-voltage DC on the keypad line, but the opener’s AC input is inside the same box, and a slipped probe across 120V while you’re crouched at the gate post is the kind of injury that ends a Saturday. If the failure is a corroded harness or a spliced data line, that’s work we’d rather handle anyway: a miswired splice can smoke the receiver board on both the keypad and the intercom. Call us at (805) 516-0855 and we’ll walk through what you’re seeing before we even dispatch a tech.
FAQs
Three to six years is the honest range here, with coastal fog and direct afternoon sun being the two biggest killers. Keypads mounted on south-facing metal posts rarely make it past four years; shaded keypads in Mission Oaks regularly run six or seven. The intercom speaker tends to fail first because the UV-stabilized plastic gives out around the cone edge. Call (805) 516-0855 and we can tell you from the date code whether your unit is in its normal failure window.
Sometimes, when the failure is a corroded ribbon connection or a stuck membrane key, but the honest answer is that keypad repairs rarely hold up past a season because the weather sealing has already been compromised. We’ll show you both options in writing, including what the repair buys you in months versus a replacement, and you decide. Estimates are free.
Most Ghost Controls keypad or intercom replacements run 45 to 90 minutes on site, including wiring verification, weather-gasketing inspection, and the photo documentation we leave with you. If the existing splice at the gate post is corroded, add 20 minutes for us to pull new wire rather than band-aid the old connection.
Yes, on every Camarillo truck. We carry Ghost Controls-compatible keypads, intercom boards, harnesses, and transformers, plus LiftMaster, Mighty Mule, and DoorKing equivalents for the times we find a previous installer mixed brands and the Ghost Controls unit was never the actual problem. Call (805) 516-0855 for an exact quote, same-day when we’re already in the field.
Call Vance Gate Repair Camarillo

If your Ghost Controls keypad or intercom has failed, call (805) 516-0855. A live person answers at any hour, and we’ll talk through the symptoms, give you the installed price in writing, and schedule a tech who arrives with the part on the truck and a name you already know. Name what you found. Name what it costs. Name what you left behind. That’s how Adrian Vance has run every job since 2014, and it’s how we’ll handle yours.
Written by Adrian Vance, Owner, Vance Gate Repair Camarillo at Vance Gate Repair Camarillo, serving Camarillo and nearby areas.





Before
After
Before
After